Inlet Adapter

Adapters are manufactured from borosilicate glass, which is internationally recognized as the premium raw material for laboratory grade glassware due to its physical and chemical characteristics.

Inlet Adapter, Inner Joint, 90 Degrees

Hose connection has an O.D. of 8mm at the largest serration and is bent at a 90 degree angle to the inner joint.

Allows for flexible tubing to be connected to apparatus for introduction of vacuum or pressure.

Tubing Inlet Adapter, Inner Joint, 90 Degrees

The tubing inlet adapter has a longer neck than the inlet adapter (mentioned above).

Borosilicate glass tubing inlet adapter allows for flexible tubing to be connected to apparatus for introduction of vacuum or pressure.

Hose connection has an OD of 8mm at the largest serration and is bent at a 90 degree angle to the inner joint.

Flow Control Adapter, Stopcock, Inlet 90 degrees

Used to regulate the flow of gases or liquids into reaction systems.

Stopcock has a bore of 2mm available in both glass and PTFE

Hose connection has an O.D. of 8mm at the middle serration

Free Shipping within the Continental USA

Glass Inlet Adapter Technical Data:

Composition:

Physical Properties:

Glass type: Hard Borosilicate Glass Linear.

Temperature Resistance:

Thermal resistance is a good gauge to how well the glass handles high heat and yet retains its shape and structural integrity. Factors that should be specially considered are softening temperature and coefficient of heat. Our borosilicate glass has high softening temperatures and low coefficient of heat enabling our glassware to withstand heat and also have a higher range of working temperatures. Special care must still be taken at temperatures above 140^oC to heating and cooling to be done in a most uniform manner.

Chemical Resistance:

Borosilicate glass has a very high resistance to attack from water, acids, salt solutions, halogens and organic solvents. Only concentrated phosphoric acid and strong alkaline solution cause significant corrosion of the glass.