Indexed MicroMeshes™ contains a 300 mesh area with 25 μm openings. Index marks and numbers make it easier to locate (and then to relocate) a given sample. Identify the most promising samples on your home microscope, and then easily find them again, e.g., at a microfocus X-ray source. Additional diagonal tabs allow the front/back orientation of the mesh and a crystal's position on the mesh to be uniquely determined in only a 100 μm field of view. The flat top of the 300/25 design makes it easier to scrape/scoop samples off of the bottom of a well or slide.
Each box contains 20 of the 300/25 Indexed MicroMesh mounts.
|Length||11, 19, 17.6 mm (SPINE length) and 25 mm lengths, marked in 2 mm intervals|
|Diameter||0.025" (0.64 mm) diameter|
|Material||Solid 316 non-magnetic stainless steel|
Beveled at 30 degrees at each end.
Please allow 2 weeks for shipping for pin lengths 11, 19 and 25mm, which are not commonly used and need to be custom made.